Reverse engineered
Switch panel & gauge pod
Rebuilt from measurements · ASA · fitted button apertures
Designed & printed in Mauritius — message us any time
WhatsApp {{ phoneDisplay }} →
What we do
Four kinds of job,
one way of working
Every job is dimensioned, modelled parametrically and validated for fit, wall thickness and load path before a printer is switched on.
Replacement parts
A component that broke and is no longer sold here. Send the piece or a photo with measurements and we rebuild it.
—Rebuilt to fit the original mounting points
—Printed in a plastic chosen for where the part lives
—Reprintable any time once the model exists
Example — dashboard radio bezel, ASA
Reverse engineering
No CAD file, no drawing, no supplier. We measure the original and rebuild it properly as a clean 3D model.
—Measured by hand and rebuilt to spec
—Apertures and clearances checked before printing
—You keep a part that can be made again
Example — switch panel and gauge pod, ASA
Moulds & tooling
Masters and multi-part moulds for silicone casting, plus jigs and fixtures for your own workshop.
—Split lines, keys and draft designed to release cleanly
—Registration pins so halves align every pour
—Jigs and fixtures built around your process
Example — two-part silicone mould, PETG
Custom & colour
Statues, figures, signage, props and gifts — printed in full colour straight off the plate, no painting needed.
—Design from a photo, a sketch or a description
—Multiple colours in a single print
—Fine layer heights for sculptural detail
Example — character bust, four-colour print
Five star
Rated five stars on Google
Multimaterial
PLA, PLA Pro, PETG, ASA and TPU — chosen per job
Multicolour
Multiple colours in a single print
Postage or pickup
Posted anywhere in Mauritius, or collect
Selected work
Recent jobs off the plate
Agriculture & outdoor
Hydroponic PVC end cap
ASA · UV stable outdoors · sized to the channel profile
Mould & tooling
Two-part silicone mould
PETG master for silicone casting · registration pins · draft angles
Multicolour
Character bust, gloss finish
Four colours in one print · sealed and gloss coated
Sculptural
Seated Buddha statue
0.08mm layers · detail held through robe folds and lotus base
Gifts & one-offs
Collector bust, full colour
Clean colour boundaries · no painting, no purge waste
Materials
Pick the plastic for the job
Not sure which one you need? Describe where the part lives — sun, heat, water, load — and we'll choose it for you.
| Material | Best for | Outdoor / UV | Heat | Notes |
|---|---|---|---|---|
| PLA | Display pieces, prototypes, indoor fittings | No | Low | Sharpest detail, widest colour range |
| PLA PRO | Strong indoor parts with no heat exposure | No | Low | Stiffer and stronger than standard PLA |
| PETG | Brackets, mould masters, watertight parts | Fair | Medium | Tough and slightly flexible, doesn't snap |
| ASA | Automotive, agriculture, anything in the sun | Yes | High | Our default for outdoor and engine-bay parts |
| TPU | Gaskets, bushes, grips, protective feet | Fair | Medium | Rubber-like, chosen by shore hardness |
How it works
From a photo on WhatsApp to a part in your hand
01
Send it over
A photo, a sketch, the broken piece, or just a description. That's enough to start a quote.
02
We quote
A fixed price before any work starts, with design and print time itemised separately. Turnaround is fast — we confirm it with the quote.
03
We design & print
Modelled, checked for fit and strength, then printed in the material that suits the job.
04
You collect it
Supports removed and cleaned up, ready to use. Collect in person, or we post it to you.
Who we are
A design shop that happens to own printers
Printify 3D is a small Mauritian workshop. Most of what we do starts as a problem rather than a file: a part that snapped, a bracket that was never sold here, a cap that has to fit exactly. We also make statues, multicolour figurines, clean functional parts, silicone moulds, signage and one-off gifts.
If 3D printing is the wrong answer for your job, we'll say so.
Based in
Mauritius
Clients
What people say
Questions
Before you send a job
A photo is enough to begin. If the part has to fit something, add rough measurements or send us the broken piece — the more we can measure, the closer the first print will be.
Yes. Send an STL, STEP or 3MF and we will print it as supplied. If the file needs fixing or the geometry will not print reliably, we will tell you before charging anything.
Tell us where the part lives — indoors, in the sun, in water, under load — and we will choose. As a rule: PLA for display, PETG for tough and watertight, ASA for sun and heat, TPU for anything that must flex.
Yes. We print multiple colours in a single job, so figures, signage and gifts come out finished with no painting.
It depends on size, material and how much design work is needed. Design and printing are quoted separately so you can see both, and the quote is free.
Yes. Once a part is modelled the file stays on file, so a repeat order needs no redesign.
Get a quote
Got something that needs making?
Quotes are free. Fill this in and choose how to send it — WhatsApp (fastest, attach photos in the chat) or email.